Commercial flooring Ajax work is delivered by Commercial Flooring Toronto, the INSTALL certified contractor covering L1S, L1T, and L1Z since 2004 across Pickering Village and the Highway 401 commercial band. Our Ajax crews work the Lakeridge Health catchment, the Harwood Avenue retail strip, and the Clements Road light-industrial pocket, serving clinics, warehouses, retail units, and office suites at the eastern edge of our 60km radius. Commercial flooring Ajax runs $4.50 to $18 CAD per sq ft depending on material, subfloor, and access, with epoxy and polyaspartic coatings at $6 to $15 CAD per sq ft. Most Ajax calls start with a trigger: a clinic near Lakeridge Health replacing aging VCT with welded-seam sheet vinyl, a Pickering Village light-industrial unit ready for a floor coating, an Ajax retail or office refresh between leases, or a warehouse needing line striping and anti-slip aggregate at the dock. Ajax sits in Elexicon Energy territory for isolation and shutdown coordination, and our crews self-perform carpet tile, commercial LVT, homogeneous sheet vinyl, rubber, epoxy, and recessed entrance matting on one written quote. 20+ years of GTA experience, WSIB clearance, and $2M commercial general liability back every Ajax project.
INSTALL Certified
Alliance for Flooring Excellence trained crews
WSIB Clear
Clearance certificate on every project file
$2M CGL
Commercial general liability insured
LEED v4
Low-emitting materials, EPD and HPD submittals
Four reasons commercial floor replacement gets deferred in Ajax, and how each one is handled on the quote rather than discovered mid-project.
Almost none of our clients can. Phased after-hours shifts from 7 PM to 5 AM, weekend windows, and zone-by-zone turnover are the normal way we work in occupied offices, retail, healthcare, and hospitality. Modular carpet tile lets us lift and replace selectively rather than clearing a whole floor plate. The after-hours differential is 25 to 40 percent on labour and it appears on the quote as its own line, so the option is priced openly before anyone commits.
Nine times out of ten it was moisture. A slab emitting above the manufacturer tolerance will lift adhesive and delaminate a coating regardless of how well the material was laid. We run ASTM F1869 calcium chloride and ASTM F2170 in-situ relative humidity testing before anything goes down, and where the readings require it we install a certified epoxy vapour mitigation barrier with a written warranty. The test results go to you, not into a file drawer.
That happens when a bidder prices off a floor plan and discovers the subfloor later. We assess the substrate first and put assessment, subfloor prep, adhesive, removal, and disposal on separate lines before work begins. Commercial flooring installation in Toronto runs $4.50 to $18 CAD per sq ft with fit-outs at $6,500 to $18,500 CAD, and those bands are published rather than gated behind a sales call.
CSA Z8000 infection control, CFIA food-plant requirements, LEED v4 low-emitting materials, AODA barrier-free thresholds, and Ontario Building Code all show up routinely in our scope. Our crews are INSTALL Alliance certified and manufacturer authorized, which keeps material warranties valid, and we supply EPD and HPD submittals plus BOMA waste-diversion logs for the project file at no extra charge.
Every material system below is self-performed by our own INSTALL certified crews in Ajax, quoted in published CAD bands, and installed with ASTM F1869 and F2170 moisture testing on the slab first.
Priority Service
Welded-seam homogeneous sheet vinyl engineered for GTA hospitals, long-term care, clinics, and institutional facilities to CSA Z8000 standards.
Priority Service
Seamless polyaspartic and commercial epoxy coatings for GTA warehouses, distribution centres, manufacturing plants, and food-processing facilities.
Priority Service
INSTALL certified, WSIB covered, $2M insured commercial flooring contractors coordinating multi-material fit-outs for GTA facility managers and general contractors.
Modular commercial carpet tile from Interface, Milliken, and Shaw Contract for GTA office tenant improvements, retail fit-outs, and condo lobbies.
Commercial luxury vinyl tile and VCT from Karndean, Amtico, and Marley Flexco for GTA offices, retail, condos, and hospitality with 20 and 30 mil wear layers.
Commercial rubber flooring from Mondo, Ecore, Nora Systems, and Roppe for GTA gyms, fitness studios, condo amenity spaces, and wellness centres.
The full commercial flooring installation process from assessment to sign-off, with moisture testing, subfloor prep, and multi-material scope across the GTA.
Recessed architectural entrance matting from Pedigrid, Nystrom, and Milliken Obex for GTA Class A lobbies, hospital entrances, and transit terminals.
Natural linoleum and Marmoleum from Forbo and Armstrong for GTA school boards, daycares, universities, and healthcare with LEED v4 and Green Label Plus.
Commercial flooring Ajax runs $4.50 to $18 CAD per sq ft depending on material, subfloor condition, and access, with full fit-outs at $6,500 to $18,500 CAD and minor patches under 100 sq ft at $650 to $1,400 CAD. Every quote is itemised before work begins, with assessment, subfloor prep, adhesive, and disposal separated on the line. No quote gating, no obligation.
Site assessment
$199 CAD, waived on same-visit authorization
Minor patch under 100 sq ft
$650 to $1,400 CAD
Standard installation
$4.50 to $18 CAD per sq ft
Full commercial fit-out
$6,500 to $18,500 CAD
| Material or line item | Installed price (CAD) |
|---|---|
| Commercial carpet tile (Interface, Milliken, Mohawk) | $4.50 to $12 CAD per sq ft |
| Commercial LVT and LVP (Karndean, Amtico, Shaw) | $5.50 to $14 CAD per sq ft |
| VCT (Marley Flexco, Armstrong) | $3.50 to $6.50 CAD per sq ft |
| Homogeneous sheet vinyl (Polyflor, Altro, Forbo, Tarkett iQ) | $8 to $22 CAD per sq ft |
| Rubber gym flooring (Mondo, Ecore, Regupol) | $8 to $18 CAD per sq ft |
| Nora healthcare rubber | $16 to $22 CAD per sq ft |
| Commercial epoxy coating | $6 to $15 CAD per sq ft |
| Polyaspartic warehouse coating | $8 to $14 CAD per sq ft |
| Linoleum and Marmoleum (Forbo, Armstrong) | $7 to $16 CAD per sq ft |
| Recessed entrance matting system | $180 to $650 CAD per unit |
| Subfloor prep add | $2 to $6 CAD per sq ft |
| Removal and disposal | $1.50 to $4 CAD per sq ft |
After-hours and weekend phasing carries a 25 to 40 percent labour differential, quoted on the line before work begins so occupied buildings can price the option openly.
Financing is available on projects over $10,000 CAD through OAC-approved commercial partners with 12 to 60 month terms and 48-hour applications.
The same 6-step process runs on every Ajax project, from a single suite to a full warehouse floor.
An estimator walks the space, identifies the existing covering and what sits under it, checks levels, and confirms access and work windows. $199 CAD, waived when work is authorized on the same visit.
ASTM F1869 calcium chloride and ASTM F2170 in-situ relative humidity probes on the slab. Readings above manufacturer tolerance trigger a certified epoxy vapour mitigation barrier with a written warranty.
An itemised quote within 4 business hours: material line, subfloor prep, adhesive, removal, disposal, and any after-hours differential, each on its own line with a CAD figure.
HEPA dustless diamond grinding, shot blasting to ICRI CSP 3 to 5 for coatings, self-levelling underlayment where the slab requires it, and full removal of legacy adhesive residue to ASTM F710.
INSTALL certified crews install to the manufacturer specification, working by zone with hoarding and dust containment so the building keeps operating. Directly employed crews, no subcontracted labour.
Thermal weld and seam verification, integral cove capping checked, site cleaned, and a written workmanship warranty issued alongside the manufacturer warranty documentation.
The $199 CAD site assessment is waived when you authorize work on the same visit, and projects over $10,000 CAD qualify for OAC-approved commercial financing over 12 to 60 months.
No quote gating. Itemised CAD pricing before any work begins.
Ajax is the eastern edge of our 60km radius, so like Oakville in the west we block work into the same week rather than running scattered single days. A Pickering Village industrial coating, a Lakeridge-area clinic, and a Harwood Avenue retail unit get sequenced together, which keeps mobilisation off your invoice. Crews run the 401 with Harwood Avenue, Westney Road, and Bayly Street as the cross routes.
Ajax is served by Elexicon Energy, a different operator from Toronto Hydro and Alectra with its own isolation lead times, so any request to de-energise a circuit for grinding or coating equipment is filed earlier and confirmed before the schedule is fixed. Light-industrial coating runs on weekend windows where the building can give one up, and in bays where it cannot, so shipping and receiving keep moving throughout.
The Clements Road and Bayly Street light-industrial pocket is smaller-format slab-on-grade with mixed-age concrete, often with no prior coating and no moisture history on file. That makes ASTM F1869 calcium chloride and ASTM F2170 relative humidity testing non-negotiable before any epoxy or polyaspartic, and ICRI CSP 3 to 5 diamond grinding is the baseline prep rather than an upgrade.
Around Lakeridge Health, clinics, diagnostic suites, and medical offices run welded-seam homogeneous sheet vinyl with integral coving for infection control, with LVT or Green Label Plus carpet tile in reception and administrative areas. Pickering Village and the Harwood retail strip carry 1980s and 1990s commercial units where legacy VCT and cut-back adhesive show up regularly once the old covering is lifted, so removal and prep get priced openly at assessment rather than appearing as a change order after demolition.
Industrial unit with no moisture history at all. They tested first, found readings above tolerance, and installed a vapour mitigation barrier under warranty before coating. That call probably saved us doing the whole floor twice.
Diagnostic suite that had to reopen on a fixed Monday. Welded sheet vinyl with integral cove in the imaging rooms, LVT out front, seams verified before handover. Finished Saturday afternoon.
Retail unit between leases with old adhesive underneath. Priced openly at the assessment, removed properly, and the new floor went in inside the landlord's turnover window.
Serving Pickering Village and the wider Town of Ajax area across the L1S, L1T, L1Z postal districts, inside our 60km GTA radius.
Yes. Ajax sits at the eastern edge of our 60km service radius and we work it regularly across Pickering Village, the Harwood Avenue retail strip, and the Clements Road light-industrial pocket. We block Ajax work into the same week where possible so you are not paying for repeated mobilisation.
We cover Pickering Village, Central Ajax, Southwood, and the Bayly Street and Clements Road commercial band across the L1S, L1T, and L1Z postal districts. Work in the Lakeridge Health catchment is routine for our crews, and we cover neighbouring Pickering and Whitby on the same terms.
A written itemised CAD quote comes back within 4 business hours of receiving site details, and the $199 CAD assessment is waived when work is authorized on the same visit. Where a coating needs a circuit isolated we confirm the Elexicon Energy lead time before issuing a schedule, since that operator runs to its own timelines.
Commercial epoxy runs $6 to $15 CAD per sq ft and polyaspartic $8 to $14 CAD per sq ft installed, including ICRI CSP 3 to 5 diamond grinding and moisture testing. Anti-slip aluminum oxide aggregate at dock aprons and line striping for aisles and pedestrian zones are quoted as visible line items so you can keep or drop them with the numbers in front of you.
Yes. Clinics, diagnostic suites, dental surgeries, and medical offices in that catchment get welded-seam homogeneous sheet vinyl from Polyflor, Altro, Forbo, or Tarkett iQ with 4 or 6 inch integral flash coving to CSA Z8000 infection-control standards, at $8 to $22 CAD per sq ft installed. Reception and administrative areas are specified separately in LVT or carpet tile to keep the overall budget sensible.
Same crews, same published CAD pricing, same INSTALL certification across the neighbouring GTA cities below.
View all 10 GTA service areas arrow_forward
Tell us the facility type, the area, and the work window. You get an itemised CAD quote back within 4 business hours with no obligation and no quote gating.
Assessment $199 CAD, waived when work is authorized on the same visit.
